21 - 30 of 273
edge plated immersion gold pcb
Selling leads
|
... for reference) General Description This is a type of double sided wrap-around antenna PCB built on 20mil substrate, cladding 0.5oz copper plated ...
2026-05-27 18:54:27
|
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-05-27 18:53:52
|
|
...PCB Board Bulit On Rogers 20mil RO4003C with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for ...
2026-05-27 18:54:34
|
|
...PCBs Built on 50mil 1.27mm TMM10 with Immersion Gold for GPS Antennas (Printed Circuit Boards are custom-made products, the picture and parameters ...
2026-05-27 18:50:45
|
|
...PCB with Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Rogers’ TMM10i ...
2026-05-27 18:50:45
|
|
...PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% fiberglass—with an Immersion Gold surface finish. ...
2026-06-09 10:10:59
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
PCB with Ball Grid Array 10-Layer BGA PCB Built On High Tg FR-4 With Immersion Gold (Printed circuits boards are custom-made products, the picture and ...
2026-05-29 14:59:25
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-05-27 18:51:34
|
|
... PCB with 25mil and 50mil Coating Immersion Gold, Immersion Tin and Immersion Silver (PCB's are custom-made products, the picture and ...
2026-05-27 18:50:30
|