201 - 210 of 273
edge plated immersion gold pcb
Selling leads
|
...PCB is a 10-layer mixed-dielectric multilayer circuit board adopting composite stacking of RO4003C ceramic hydrocarbon laminate and RF4-370HR high...
2026-05-29 14:59:18
|
|
...PCB Single-End Impedance Circuit Board 10 Layer PCB Board Satellite systems 1.1 General description This is a type of multilayer PCB built on FR-4 ...
2026-05-27 18:53:45
|
|
...) Hello Everyone, Today, we introduce a type of high frequency PCB built on RF-35TC. RF-35TC is a PTFE based, ceramic filled fiberglass high ...
2026-05-27 18:54:40
|
|
...) 1.1 General description This is a type of 2 oz double sided PCB built on FR-4 substrate with Tg 150°C for the application of micro SATA carrier ...
2026-05-29 14:59:31
|
|
...substrate with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
... for reference) General Description This a a type of double-sided high frequency PCB built on 40mil (1.016mm) CLTE-XT substrates with green solder ...
2026-05-27 18:50:53
|
|
...PCB is a low-loss, high-stability microwave circuit board designed for RF, microwave, radar and satellite communication systems. Built with ...
2026-07-28 18:29:08
|
|
... with 1oz outer layer and half ounce inner layer. White silkscreen over matt blue solder mask on both top and bottom side. Surface finish is ...
2026-05-29 14:59:27
|
|
...PCB Differential Impedance Circuit Board 8 Layer PCB for Wireless HDMI 1.1 General description This is a type of 8 layer printed circuit board ...
2026-05-27 18:53:43
|
|
...PCB 24 Layer Printed Circuit Board Built On High Temperature FR-4 With 50 Ohm / 100 Ohm Impedance for Industrial controls General description This ...
2026-05-29 14:59:30
|