11 - 20 of 534
double layer rogers pcb board
Selling leads
|
Rogers PCB Made on RO3035 10mil 0.254mm DK3.5 with Immersion Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom...
2026-05-27 18:50:23
|
|
Rogers High Frequency PCB Made on RT/duroid 5870 with 10mil, 20mil, 31mil and 62mil Coating with Immersion Gold (PCB's are custom-made products, ...
2026-07-08 14:40:59
|
|
... for reference) Rogers RT/duroid 6010LM microwave laminates are ceramic-PTFE composites which are designed for electronic and microwave circuit ...
2026-05-27 18:50:27
|
|
Rogers 15mil TMM10 High Frequency PCB With Immersion Gold and Green Solder Mask for Chip Testers (Printed Circuit Boards are custom-made products, the ...
2026-05-27 18:50:44
|
|
... shown are just for reference) Rogers RT/duroid 6002 microwave material was the first low loss and low dielectric constant laminate to offer ...
2026-05-27 18:50:26
|
|
... for reference) Rogers RO3210 high frequency circuit materials are ceramic-filled laminates reinforced with woven fiberglass. These materials are ...
2026-05-27 18:50:26
|
|
Rogers RT/Duroid 5880 62mil 1.575mm High Frequency PCB for Commercial Aireline Broadband Antennas (Printed Circuit Boards are custom-made products, ...
2026-05-27 18:50:23
|
|
Rogers RO3003 High Frequency PCB with 10mil, 20mil, 30mil and 60mil Thick Coating Immersion Gold, Immersion Silver, Immersion Tin and HASL (PCB's ...
2026-06-09 09:54:58
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-05-27 18:51:34
|
|
...shown are just for reference) General description This is a type of double sided flexible printed circuit (FPC) built on polyimide for the ...
2026-05-29 14:59:54
|