121 - 130 of 182
bare copper pcb
Selling leads
|
...the outer layers, a final board thickness of 1.5mm, and a via plating thickness of 20 μm, this PCB delivers consistent electrical performance and ...
2026-04-13 05:31:19
|
|
PTFE PCB Board Built On 1.5mm PTFE Plate with 3oz Copper and Immersion Silver Pads for Power Amplifier (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 60mil 1.524mm With Immersion Gold for Satellites (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
...PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc. (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
...s 4 layer RF PCB is built on 60mil RO4350B and 10mil RO4350B for the application of UHF coupler. Look at the stack-up. Base materials are 60mil ...
2026-04-13 05:31:19
|
|
... Layer Counts 1-32 Substrate Material FR-4(including High Tg 170, High CTI>600V); Aluminum based; Copper based; Rogers RO4350B, RO4003C, RO3003, ...
2026-04-13 05:31:19
|
|
.... With a base copper thickness of 17um, dielectric thickness of 31mil, and a finished board thickness of 0.96mm, this board is perfect for a ...
2026-04-13 05:31:19
|
|
..., 4G and 5G communications. The dielectric constant of F4B ranges from 2.2 to 2.65, with other values available such as 2.17, 2.45, 2.75, and 3.0. ...
2026-04-13 05:31:19
|
|
Brief Introduction This 2-layer rigid PCB features a stackup with copper_layer_1 of 35 μm, a Rogers RO4725JXR Core of 30.7mil (0.780 mm), and copper...
2026-04-13 05:31:19
|
|
Introducing our newly shipped PCB made of RO306 substrates. RO3006 Introduction: Rogers RO3006 laminates are advanced circuit materials that utilize ...
2026-04-13 05:31:19
|