71 - 80 of 87
60mil immersion gold surface finished pcb
Selling leads
|
...h 10mil, 20mil, 30mil and 60mil thick Coating with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 60mil 1.524mm With Immersion Gold for Satellites (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
Taconic RF PCB Made on TLF-35 60mil 1.524mm With Immersion Gold for Mixer, Filters and Couplers etc. (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
Double Sided PCB Built On 60mil Rogers TC350 With Immersion Gold for Thermally Cycled Antennas Rogers' TC350 is a woven fiberglass reinforced, ceramic ...
2026-04-13 05:31:19
|
|
...PCB is a 2-layer rigid board, constructed with Rogers DiClad 870 (a woven fiberglass reinforced, PTFE-based composite) as its base material, ...
2026-04-13 05:31:19
|
|
As the demand for advanced electronic solutions grows, the need for high-quality printed circuit boards (PCBs) has never been more critical. Our newly ...
2026-04-13 05:31:19
|
|
...PCB is a two-layer rigid PCB fabricated using Rogers RT/duroid 6002, a ceramic-filled polytetrafluoroethylene (PTFE) microwave laminate distinguish...
2026-04-21 13:33:20
|
|
...PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz copper weight, along with a finished board thickness of 1.8mm and a ...
2026-04-13 05:31:19
|
|
...PCB) is constructed using Rogers RO3010 as its core substrate and features an Immersion Silver surface finish. Equipped with a 1oz (1.4 mils) ...
2026-04-13 05:31:19
|
|
...PCB uses RT duroid 5880 high-frequency laminates integrated with High Tg 170°C FR-4 as its material, delivering superior high-frequency signal ...
2026-04-13 05:31:19
|