21 - 30 of 417
4 layer polyimide pcb board
Selling leads
|
... thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 72 up PCB per ...
2026-05-27 18:53:51
|
|
...Layer Flexible PCB Built on Polyimide With 1.6mm FR-4 Stiffener and Immersion Gold for Instrument Panel (Flexible printed circuits are custom-made ...
2026-05-29 15:00:07
|
|
... are just for reference) Brief Introduction This is a type of low loss high performance multi-layer PCB built on TUC’s TU-883 core with 20 copper ...
2026-05-29 14:59:30
|
|
... exceptional high-frequency performance, dimensional stability, and circuit miniaturization. PCB Specification Parameter Specification Layer Count ...
2026-05-27 18:51:16
|
|
... for reference) 1.1 General description This is a type of impedance controlled PCB built on FR-4 material with Tg 175°C for the application of ...
2026-05-27 18:53:45
|
|
...Layer High Frequency PCB Board Bulit On Rogers 20mil RO4003C with Immersion Gold (PCB's are custom-made products, the picture and parameters ...
2026-05-27 18:54:34
|
|
10 Layer High Frequency PCB Built On 5 Cores of 10mil RO4350B with 4mil RO4450F for Broadband Wireless Solutions (PCB's are custom-made products, ...
2026-05-27 18:54:33
|
|
.... It's 1.6 mm thick with white silkscreen on green solder mask and immersion gold on pads. The base material is from ITEQ supply 1 up board per ...
2026-05-29 14:59:27
|
|
...PCB 2-Layer: 35μm Copper Layers 2.5mm Thickness This 2-layer rigid PCB, built with Rogers DiClad 870 as its base material, is engineered to excel ...
2026-05-27 18:53:16
|
|
...) 1.1 General description This is a type of 2 oz double sided PCB built on FR-4 substrate with Tg 150°C for the application of micro SATA carrier ...
2026-05-29 14:59:31
|