351 - 359 of 359
4 layer immersion gold pcb
Selling leads
|
Utilizing Rogers RO3003 high-frequency laminate as the base material, this PCB is tailored for commercial microwave and RF applications. RO3003 is a ...
2026-04-13 05:31:19
|
|
Flexible Printed Circuit (FPC) Built on 1oz Polyimide with Gold Plated and PI Stiffener for Modem USB (Flexible printed circuits are custom-made ...
2026-04-13 05:31:19
|
|
Flexible Printed Circuit (FPC) Built on 1oz Polyimide With Gold Plated for Temperature Module (Flexible printed circuits are custom-made products, the ...
2026-04-13 05:31:19
|
|
...s is a type of dual layer flexible circuit built on PET substrate, 1oz copper weight on each layer. The FPC is coating with white solder mask and ...
2026-04-13 05:31:19
|
|
... of 60mil (1.524mm) and immersion gold plating, the TLF-35 PCB is designed to provide excellent peel strength for 1/2 ounce and 1 ounce copper, ...
2026-04-13 05:31:19
|
|
...PCB Built on 6.15 DK RF-60TC 10mil, 20mil, 30mil and 60mil Coating with Immersion Gold, Tin, HASL and OSP for Miniaturized Antenna (Printed Circuit ...
2026-04-13 05:31:19
|
|
...Gold Plated and 2 Meters Long for Telemetry System (Flexible printed circuits are custom-made products, the picture and parameters shown are just ...
2026-04-13 05:31:19
|
|
...s FPC is a single sided strips with 2-meter long, 1oz copper with tesa tape on back side, white coverlay and immersion gold on the pads. It is ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|