1 - 10 of 34
4 layer hybrid pcb ad250c
Selling leads
|
...AD250C+ TG170 FR-4 as its core materials, this 4-layer hybrid PCB features an Immersion Tin surface finish. Each layer is equipped with a 1oz ...
2026-05-29 15:00:49
|
|
...Layer Hybrid PCB RO4350B + High Tg FR-4 (S1000-2M) Blind Vias This 6-layer hybrid PCB combines Rogers RO4350B (high-frequency laminate) and High Tg ...
2026-05-29 15:00:49
|
|
...Layer Hybrid PCB Board Built On Rogers 10mil RO4350B and FR-4 (PCB’s are custom-made products, the picture and parameters shown are just for ...
2026-05-29 15:00:50
|
|
...Layer Hybrid PCB Board Made On 13.3mil RO4350B and 31mil RT/Duroid 5880 for Multicoupler Antenna (PCB's are custom-made products, the picture ...
2026-05-29 14:59:24
|
|
... we’re going to talk about the 20mil RO4350B and FR-4 mixed. Most of the situations are that the high frequency material plays the role of signal ...
2026-05-29 15:00:51
|
|
... PCB adopts a professional stacked structure with 0.203mm RO4003C high-frequency laminates on the top and bottom layers and S1000-2M high...
2026-07-28 18:29:09
|
|
This 8-layer high-frequency hybrid PCB adopts a composite substrate structure, with 10mil RO4350B high-frequency substrate on the top and bottom ...
2026-05-29 14:59:32
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-06-09 09:54:59
|
|
This PCB is a 10-layer mixed-dielectric multilayer circuit board adopting composite stacking of RO4003C ceramic hydrocarbon laminate and RF4-370HR ...
2026-05-29 14:59:18
|
|
This PCB uses RT duroid 5880 high-frequency laminates integrated with High Tg 170°C FR-4 as its material, delivering superior high-frequency signal ...
2026-05-29 14:59:33
|