421 - 430 of 716
3oz copper pcb board
Selling leads
|
Taconic High Frequency PCB Built On TLY-3 30mil 0.762mm With Immersion Gold for Satellite / Cellular Communications (Printed Circuit Boards are custom...
2026-04-13 05:31:19
|
|
Rogers High Frequency PCB Built On RO4730G3 20mil 0.508mm DK3.0 With Immersion Gold for Cellular Base Station Antenna (Printed Circuit Boards are ...
2026-04-13 05:31:19
|
|
...s is a type of flexible printed circuit for the application of analog device. It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
...PCB on Polyimide With Immersion Gold and 3M Tape and PI Stiffener Supplied Mass Production (Flexible printed circuits are custom-made products, the ...
2026-04-13 05:31:19
|
|
Rogers RT/Duroid 5870 10mil 0.254mm High Frequency PCB for Commercial Aireline Broadband Antennas (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
Rogers RO3203 Double Sided 10mil High Frequency PCB With immersion Gold For Direct Broadcast Satellites (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
Dual Layer High Frequency PCB Made on Rogers 60mil RT/duroid 6035HTC With Green Mask for High Power RF Amplifiers (Printed Circuit Boards are custom...
2026-04-13 05:31:19
|
|
... circuit board.TC350 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and ...
2026-04-13 05:31:19
|
|
Double Sided PCB Built On 30mil Rogers TC350 With Immersion Gold for Tower Mounted Amplifiers Rogers' TC350 is a woven fiberglass reinforced, ceramic ...
2026-04-13 05:31:19
|