181 - 190 of 263
3 layer immersion tin pcb
Selling leads
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-04-13 05:31:19
|
|
...) General description This is a type of 4 layer flexible printed circuit for the application of Electronic Counter. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
...Layer Flexible Circuit FPC Flex PCB 0.15mm thick with Immersion Gold (FPC’s are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
...Layer Flexible PCB Built On Transparent PET with Immersion Gold and PI Stiffener for Automobile Sensor (Flexible printed circuits are custom-made ...
2026-04-13 05:31:19
|
|
...PCB 10 Layers 10-layer Quality Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed ...
2026-04-13 05:31:19
|
|
Brief Introduction This 2-layer rigid PCB features a stackup with copper_layer_1 of 35 μm, a Rogers RO4725JXR Core of 30.7mil (0.780 mm), and copper...
2026-04-13 05:31:19
|
|
Brief Introduction This PCB is a 2-layer rigid board with stackup of 1oz (35μm) copper on top layer and bottom layer, sandwiching the 20mil DiClad 527 ...
2026-04-13 05:31:19
|
|
Brief Introduction This type of ceramic circuit board adopts an complicated 6-layer board design and selects aluminum nitride (AlN) as the substrate. ...
2026-04-13 05:31:19
|
|
Rogers RO4360G2 6-layer High Frequency PCB Based on 8mil Core With Immersion Gold for Small Cell Transceivers (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... layer MCPCB board at 1.6 mm thick with 1 W/MK thermal conductivity. The aluminum plate is from ITEQ, Solder mask and silkscreen from Taiyo. It's ...
2026-04-13 05:31:19
|