101 - 110 of 261
3 layer immersion tin pcb
Selling leads
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-05-27 18:53:52
|
|
...PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-05-27 18:51:34
|
|
... we’re talking about a type of 10-layer hybrid PCB built on RO4350B and FR-4. This board is used for high gain applications. The board actually is ...
2026-05-27 18:54:34
|
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:53:55
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-05-27 18:51:34
|
|
...) General Description This is a type of antenna PCB that built on specialty antenna laminates AD255C. It’s a double layer board with antenna pads ...
2026-05-28 07:30:16
|
|
... This is a type of flexible printed circuit (FPC) for the application of Wi Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains ...
2026-05-29 14:59:53
|
|
... a type of flexible printed circuit for the application of analog device. It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, It&...
2026-05-29 14:59:56
|
|
... General description This is a type of 8-layer printed circuit board built on FR-4 Tg175℃ substrate for the application of Satellite Radio. It'...
2026-05-27 18:53:40
|
|
...s is a type of aluminum PCB for the application of communication electronic equipment. It's a single layer MCPCB board at 1.6 mm thick with 3 W...
2026-05-29 14:59:41
|