341 - 350 of 358
30mil immersion gold circuit
Selling leads
|
... circuit board.TC350 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and ...
2026-04-13 05:31:19
|
|
...ed PCB Built On 60mil Rogers TC350 With Immersion Gold for Thermally Cycled Antennas Rogers' TC350 is a woven fiberglass reinforced, ceramic filled...
2026-04-13 05:31:19
|
|
...Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) Hello Everyone, Today, we introduce ...
2026-04-13 05:31:19
|
|
... built on 40mil (1.016mm) CLTE-XT substrates with green solder mask and white silkscreen printed on component sides. The pads are protected by ...
2026-04-13 05:31:19
|
|
Taconic PCB Built on RF-35TC 20mil 0.508mm with Black Solder Mask and Immersion Gold for Power Amplifiers (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... with 0.5oz copper and finished with 1oz copper. The board features fine lines that are 4mil wide and microvias with a 0.2mm diameter. The pads ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 30mil 0.762mm With Black Solder Mask for Antennas (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
... connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm thick which result in whole PCB thickness to 1.9mm ...
2026-04-13 05:31:19
|
|
Hybrid 10-Layer PCB Rogers RO4350 6.6mil+FR4 Hybrid PCB With Red Solder Mask and Immersion Gold (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
High Frequency PCB Built on Taconic RF-35TC DK3.5 With 60mil Thick and Immersion Gold for Power Amplifier (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|