241 - 250 of 358
30mil immersion gold circuit
Selling leads
|
...Circuit Board On Rogers 60mil RO4350B and 10mil RO4350B with Back Drill for UHF Coupler This 4 layer RF PCB is built on 60mil RO4350B and 10mil ...
2026-04-13 05:31:19
|
|
4-Layer High Frequency PCB Built On 2 Core of 10mil RO4350B with Immersion Gold for Wireless Antenna System (Printed circuit boards are custom-made ...
2026-04-13 05:31:19
|
|
... 170°C for the application of Satellite systems with 10 layer copper. It's 1.6 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) ...
2026-04-13 05:31:19
|
|
... with Tg 135°C for the application of GPS Tracker For Kids. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) and immersion ...
2026-04-13 05:31:19
|
|
... circuit board.TC350 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and ...
2026-04-13 05:31:19
|
|
... TLF-35 RF Printed Circuit Board is a custom-made product that provides high-frequency capabilities for a variety of commercial microwave and radio ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|
|
Immersion Silver PCB On 1.0mm Epoxy Glass ITEQ FR-4 2 Layer Circuit Board for USB Charger 1.1 General description This is a type of 2 layer printed ...
2026-04-13 05:31:19
|
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-04-13 05:31:19
|
|
Introducing the RT/duroid 6035HTC PCB, a cutting-edge solution intended to meet the demanding requirements of high-power RF and microwave applications...
2026-04-13 05:31:19
|