41 - 50 of 518
2 layer rigid pcb
Selling leads
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-04-13 05:31:19
|
|
Introducing our advanced 6-layer Hybrid PCB, combining the high-frequency capabilities of RO4350B with the mechanical strength of high-Tg FR-4. This ...
2026-04-13 05:31:19
|
|
...is fabricated using Rogers RO4730G3 antenna-grade laminate, ensuring superior electrical performance, reliability, and cost-effectiveness. 1. PCB ...
2026-04-13 05:31:19
|
|
... This is a type of flexible printed circuit (FPC) for the application of Wi Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains ...
2026-04-13 05:31:19
|
|
...s is a type of flexible printed circuit for the application of analog device. It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
...) General description This is a type of 4 layer flexible printed circuit for the application of Electronic Counter. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
...Circuit (FPC) 4-layer Flex PCB with 0.25mm Thick and Immersion Gold for Display Backlight (Flexible printed circuits are custom-made products, the ...
2026-04-13 05:31:19
|
|
...Layer Flexible PCB Built on Polyimide With 1.6mm FR-4 Stiffener and Immersion Gold for Instrument Panel (Flexible printed circuits are custom-made ...
2026-04-13 05:31:19
|
|
...-layer PCB, and the cost of drilling usually accounts for 30% to 40% of the cost of PCB fabrication. Briefly, every hole in the PCB can be called a ...
2026-04-13 05:31:19
|
|
Double Layer Rogers PCB Built on 60.7mil RO4003C LoPro Reverse Treated Foil for Power Amplifiers RO4003C LoPro laminates use a proprietary Rogers' ...
2026-04-13 05:31:19
|