11 - 20 of 634
2 layer pcb board
Selling leads
|
... drilling, the ring of microvias and blind via below 6 mil, internal and external layers of track width, track gap below 4 mil, pad diameter is not ...
2026-05-27 18:54:35
|
|
... thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 72 up PCB per ...
2026-05-27 18:53:51
|
|
...-layer PCB, and the cost of drilling usually accounts for 30% to 40% of the cost of PCB fabrication. Briefly, every hole in the PCB can be called a ...
2026-05-27 18:54:35
|
|
... with Tg 150°C for the application of vehicle tracking system. As request, it's panelized 12 up with 10mm strips each board because there's ...
2026-05-29 14:59:29
|
|
... with white silkscreen(Taiyo) on green solder mask (Nanya) and immersion silver on pads. The base material is from Taiwan ITEQ supplying 1 up PCB ...
2026-05-27 18:53:42
|
|
... General description This is a type of 8-layer printed circuit board built on FR-4 Tg175℃ substrate for the application of Satellite Radio. It'...
2026-05-27 18:53:40
|
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:53:55
|
|
...Layer IsoClad 933 PCB 62mil Substrates with ENIG Finish The 2-layer PCB featuring Diclad 933 as its base material is a high-performance electronic ...
2026-05-27 18:53:17
|
|
...Layer PCB: 1.6mm Thickness 100% Electrical Test This is a 6-layer high-performance PCB constructed with Rogers RO4350B laminate, a woven glass...
2026-05-27 18:51:13
|
|
...PCB 4-Layer with countersunk holes This high-performance 4-layer PCB is engineered using Rogers' RO4003C material--a woven glass reinforced ...
2026-05-27 18:51:12
|