121 - 130 of 253
20mil bare copper pcb
Selling leads
|
... substrate is a combination of metal based high frequency materials. The intermediate medium is made of high frequency materials (such as PTFE and ...
2026-04-13 05:31:19
|
|
F4B PTFE High Frequency PCB 2oz Copper 0.8mm Thick With Immersion Gold for Low Noise Amplifiers (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 3.0mm F4B DK2.2 for Radio Systems (PCB's are custom-made products, the picture and parameters shown ...
2026-04-23 00:15:52
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-04-13 05:31:19
|
|
...just for reference) General Description This is a type of antenna PCB made on Rogers RO4535 with 30mil substrate, starting 0.5oz copper, finished ...
2026-04-13 05:31:19
|
|
... choice for your projects. T110 Series Unveiled: Totking's T110 series comprises a range of metal substrates, including aluminum, ferrum, copper, ...
2026-04-13 05:31:19
|
|
... and thermal stability, making it ideal for demanding wireless communication systems, automotive radar, and satellite technologies. The stack-up of ...
2026-04-13 05:31:19
|
|
4 Layer Flexible PCB Built on Polyimide with 2 oz Copper and Immersion Gold plus Keypads for Mobile Devices (FPC’s are custom-made products, the ...
2026-04-13 05:31:19
|
|
Brief Introduction The stackup of the this PCB consists of two copper layers, each with a thickness of 35 μm. The substrate material used is RO3206, ...
2026-04-13 05:31:19
|
|
... thermal conductivity, high insulation, high heat capacity, and a thermal expansion coefficient that matches that of the chip. This board adopts a ...
2026-04-13 05:31:19
|