1 - 10 of 25
1 5mm teflon pcb board
Selling leads
|
... thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 72 up PCB per ...
2026-05-27 18:53:51
|
|
...39;s 1.57 mm thick without mask. The base material is from ILM supplying 1 up single board. They're fabricated per IPC 6012 Class 2 using ...
2026-05-27 18:53:49
|
|
PTFE PCB Board Built On 1.5mm PTFE Plate with 3oz Copper and Immersion Silver Pads for Power Amplifier (Printed Circuit Boards are custom-made ...
2026-05-27 18:53:30
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
...PCB 2-Layer: 35μm Copper Layers 2.5mm Thickness This 2-layer rigid PCB, built with Rogers DiClad 870 as its base material, is engineered to excel ...
2026-05-27 18:53:16
|
|
...Board (PCB) on IT-180ATC and IT-180GNBS Lead Free Compliance (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-05-27 18:53:57
|
|
...Hello everybody, Today we talk about a type of F4B high frequency circuit board. F4B series high frequency material is mainly PTFE glass fiber ...
2026-07-08 14:41:00
|
|
... shown are just for reference) Hello everybody, Today we talk about F4B (PTFE) high frequency circuit board. F4B is a series of PTFE based high ...
2026-05-27 18:50:28
|
|
.... It's 1.5 mm thick without copper pattern, no silkscreen and solder mask and surface finish either. The base material is from ILM supplying ...
2026-05-27 18:53:50
|
|
... conductivity and electrical insulation properties, enabling efficient heat dissipation. The finished board thickness is 1.5mm, and both the inner ...
2026-05-27 18:53:09
|