11 - 20 of 96
1 22mm thick immersion gold pcb
Selling leads
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-05-27 18:53:52
|
|
...s is a type of aluminum PCB for the application of communication electronic equipment. It's a single layer MCPCB board at 1.6 mm thick with 3 W...
2026-05-29 14:59:41
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
PCB with Ball Grid Array 10-Layer BGA PCB Built On High Tg FR-4 With Immersion Gold (Printed circuits boards are custom-made products, the picture and ...
2026-05-29 14:59:25
|
|
... PCB measures 170mm x 90mm with a tolerance of +/- 0.15mm and the minimum trace width and spacing are 4 mils (0.1mm). The overall thickness of the ...
2026-05-27 18:52:09
|
|
...General description This is a type of multilayer PCB built on FR-4 substrate with Tg 150°C for the application of mobile phone with blind via ...
2026-05-27 18:54:37
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-05-27 18:54:05
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-05-27 18:53:52
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-05-27 18:53:55
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-05-27 18:51:37
|