41 - 50 of 267
15mil thick immersion gold pcb
Selling leads
|
...PCB DK4.5 with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) General Description ...
2026-05-27 18:50:31
|
|
... This is a type of flexible printed circuit (FPC) for the application of Wi Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains ...
2026-05-29 14:59:53
|
|
... a type of flexible printed circuit for the application of analog device. It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, It&...
2026-05-29 14:59:56
|
|
... description This is a type of 8-layer printed circuit board built on FR-4 Tg175℃ substrate for the application of Satellite Radio. It's 1.6 mm ...
2026-05-27 18:53:40
|
|
...FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-05-29 14:59:29
|
|
...PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% fiberglass—with an Immersion Gold surface finish. ...
2026-06-09 10:10:59
|
|
High Frequency PCB Built on PTFE (Teflon) with 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm thick with Immersion Gold, Silver, Tin and OSP (PCB's are ...
2026-05-27 18:50:28
|
|
Multilayer Flexible Printed Circuit (FPC) 4-layer Flex PCB with 0.25mm Thick and Immersion Gold for Display Backlight (Flexible printed circuits are ...
2026-05-29 15:00:08
|
|
...and bottom side.Pads are plated with electroless nickel and immersion gold (ENIG). Every 50 boards are vaccum packed for shipment. PCB Specificatio...
2026-05-27 18:54:25
|
|
... for reference) General description This is a type of assembled flexible PCB built on polyimide substrate with Tg 60°C for the application of ...
2026-05-29 15:00:27
|