71 - 80 of 190
10mil enepig finish pcb
Selling leads
|
...PCB is a 2-layer rigid board, constructed with Rogers DiClad 870 (a woven fiberglass reinforced, PTFE-based composite) as its base material, ...
2026-05-27 18:51:23
|
|
...h white legend, it adopts 1oz copper on each conductive layer with a 1.6mm finished board thickness. Configured with 50Ω controlled impedance on ...
2026-06-24 15:01:26
|
|
...PCB 2-layer Immersion Tin Finish This 2-layer rigid PCB is crafted from Taconic TLX-9, a PTFE/woven glass laminate. This material is highly valued ...
2026-05-27 18:53:18
|
|
... Transceiver. It's 1.5 mm thick without copper pattern, no silkscreen and solder mask and surface finish either. The base material is from ILM ...
2026-05-27 18:53:50
|
|
PCB Spacer Blank FR-4 Board 0.8mm Fiber Board 1.0mm Spacer Board 1.6mm PCB Board 1.1 General description This is a type of blank PCB built on FR-4 ...
2026-05-27 18:54:23
|
|
... high-thermal-conductivity ceramic-filled PTFE substrate and standard 1oz outer copper layers, this lightweight rigid PCB features a slim 0.6mm ...
2026-07-28 18:29:11
|
|
...PCB on RF-10 Substrate 20mil Immersion Silver Finish This 2-layer high-performance PCB is engineered for RF (Radio Frequency) applications, ...
2026-05-27 18:53:18
|
|
...is fabricated using Rogers RO4730G3 antenna-grade laminate, ensuring superior electrical performance, reliability, and cost-effectiveness. 1. PCB ...
2026-05-27 18:51:14
|
|
... PCB utilizes an AL 5052 aluminum substrate supplied by Mingtai, adopts Lead-Free Hot Air Solder Leveling (HASL) as its surface finish, and is ...
2026-05-29 14:59:38
|
|
...circuit board (PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% fiberglass—with an Immersion Gold ...
2026-06-09 10:10:59
|