81 - 90 of 204
0 3mm high frequency circuit board
Selling leads
|
Rogers DiClad 880 High Frequency PCB 20mil 30mil 60mil with Gold, Tin and Silver (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:50:51
|
|
PTFE PCB: Ideal Material for High-Frequency Applications In providing PCBs for high-frequency applications. PTFE PCB is ideal for demanding applicatio...
2026-05-27 18:53:31
|
|
Introducing our newly shipped PCB which is based on the RT/duroid 6035HTC high Frequency material. The RT/duroid 6035HTC High Frequency substrate is a ...
2026-05-27 18:52:07
|
|
The Taconic TLF-35 RF Printed Circuit Board is a custom-made product that provides high-frequency capabilities for a variety of commercial microwave ...
2026-05-27 18:54:07
|
|
...just for reference) This is a 4-layer RO4350B high frequency PCB built on 2 10mil cores, bonded by 1 sheet of RO4450Fprepreg. As per the requiremen...
2026-05-27 18:54:00
|
|
...high-reliability circuit board built with PTFE fiberglass laminate, specifically engineered for high-volume antenna systems and general microwave ...
2026-07-28 18:29:10
|
|
This customized 2-layer rigid high-frequency PCB utilizes Rogers RT/duroid 5880 glass microfiber reinforced PTFE composite, engineered for ultra-low...
2026-06-24 15:01:28
|
|
Rogers RT/Duroid 6006 High Frequency PCB Rogers RT/duroid 6006 microwave laminates are ceramic-PTFE composites which are designed for electronic and ...
2026-05-27 18:50:28
|
|
Brief Introduction The stackup of the this PCB consists of two copper layers, each with a thickness of 35 μm. The substrate material used is RO3206, ...
2026-05-27 18:51:53
|
|
This 2-layer rigid PCB adopts Rogers RO4725JXR, a hydrocarbon/ceramic/woven glass antenna grade laminate. It is specifically engineered to reliably ...
2026-05-27 18:51:17
|