91 - 100 of 296
oem porcelain power line insulators
Selling leads
|
...Porcelain Strain Insulators / light gray glaze / OEM available Description: ANSI CLASS Tensile strength (kN) Wet power frequency flashover voltage ...
2025-04-21 19:25:02
|
|
...Porcelain 57-11 Line Post Insulator Low loss Descriptions: Our insulators have externally attached caps and bases. A highly engineered cementing ...
2025-04-21 19:25:02
|
|
...line Soild-Core Station post insulator Description: We offers a wide range of porcelain station post insulators. For decades, these products have ...
2025-04-21 19:25:02
|
|
...insulators shall be made of good commercial-grade wet-process porcelain.The entire surface of the insulator, with the exception of a firing surface...
2025-04-21 19:25:02
|
|
... of the pole to carry power lines. There is a groove on the upper end of a pin insulator for housing the conductor. Conductor wire is passed ...
2025-04-21 19:25:02
|
|
...Porcelain Standoff Insulators metal fitting / OEM Brief introduction: The interrupter adoption porcelain and ceramics makes to insulate the outer ...
2025-04-21 19:25:02
|
|
... (kV) Dry(kV) Wet(kV) Positive(kV) 57-3 737 311 12.5 125 95 200 30 1. Line post insulators shall conform in all respects to the requirements of ...
2025-04-21 19:25:02
|
|
...line disk type porcelain suspension insulator 52-3 Description: Our insulators have externally attached caps and bases. A highly engineered ...
2025-04-21 19:25:02
|
|
... uniformly from the hardware into the porcelain body. Each insulator body is made from the highest quality clay raw materials that have been ...
2025-04-21 19:25:02
|
|
OEM ANSI 13kn 56-3 High voltage electric Pin Type Porcelain Descriptions: 1. The insulators have excellent electrical & machincal performance. 2. The ...
2025-04-21 19:25:02
|