31 - 40 of 86
hdg pole mounting bracket
Selling leads
|
Overview The UPB bracket can be used for below situation: • Suspension of running out rollers • Jointing points • Stay systems • Angle points • Cross...
2025-02-26 13:13:38
|
|
... poles on short span networks J Hook suspension clamps (ADSS hanging clamp) are designed to provide a suspension for 5-20mm aerial ADSS cables at ...
2025-02-26 13:13:38
|
|
Pole Lin Hardware Forged Adjustable Stay Rod Overview Stay Rods also called stay set are used to connect the stay wire to the ground anchor. These ...
2025-02-26 13:13:38
|
|
Pole Line Hardware Square Head Bolt Galvanized Bolts and Nuts Description Square head machine bolts were the industry standard prior to hex bolts ...
2025-02-26 13:13:38
|
|
... bar section used for the parallel deployment of overhead lines. Presenting 11 pre-drilled holes, this cross-arm installs on a pole bracket adapted ...
2025-02-26 13:13:38
|
|
...cables on poles initially dedicated to low voltage networks. Installation: On concrete poles with 2 cross-arm brackets and 2 assembly bolts 1/12 On ...
2025-02-26 13:13:38
|
|
H.D.G Hot Dip Galvanized Square Head Machine Bolt Description Square Head Machine bolt ( H.D.G Machine bolt) used to fasten utility pole line hardware ...
2025-02-26 13:13:38
|
|
0.745- 0.162 inch / 0.547 - 0.162 inch Aluminum Hotline Clamp Overview Aluminum Hotline Clamp are built for General/ Aluminum and ACSR conductor ...
2025-02-26 13:13:38
|
|
... to minimize bending and kinking of guy strand. Eye nuts are forged from basic open hearth carbon steel tapped to fit HDG bolts made to ANSI ...
2025-02-26 13:13:38
|
|
... deployment of overhead lines. Installation: on non drillable poles (concrete, composite,...) on drillable poles (wooden) on pre-drilled poles ...
2025-02-26 13:13:38
|