1 - 10 of 12
cross arm
Selling leads
|
Description The cross-arm 11 holes is an angled bar section used for the parallel deployment of overhead lines. Installation: on non drillable poles ...
2025-02-26 13:13:38
|
|
Description Cross-arm with 11 holes can receive at its extremity a drop anchoring plate FE used for the anchoring of drop cables perpendicularly to ...
2025-02-26 13:13:38
|
|
Cross-Arm 11 holes Characteristics Material: hot dip galvanised steel Hole spacing: 40mm Dimensions: 436x40x40mm Customer benefits: Corss-arm with 11 ...
2025-02-26 13:13:38
|
|
Application Cross-arm with 11 holes can be used for pole, extension bracket, polt mounting on fiber optic and copper networks Up to 8 routing cables ...
2025-02-26 13:13:38
|
|
Introduction The cross-arm 13 holes is an angled bar section used for roll-out overhead parallel lines. Equipped with 13 holes this pole bracket ...
2025-02-26 13:13:38
|
|
Introduction Crossarm 13 holes bracket role is to enable fastening points for deadending and suspension applications. The cross-arm 13 holes is an ...
2025-02-26 13:13:38
|
|
Introduction Cross-arm 15 holes Angle bar metal 1090 x 40 x 40mm with 15 holes spaced by 60mm. This cross-arm is used for the parallel deployment of ...
2025-02-26 13:13:38
|
|
Introduction This cross-arm is used for the parallel deployment of telecom cables on poles initially dedicated to low voltage networks. Cross-arm 15 ...
2025-02-26 13:13:38
|
|
Application Cross-arm with 15 holes can be used for pole, extension bracket, polt mounting on fiber optic and copper networks Installation: On ...
2025-02-26 13:13:38
|
|
Free Sample Pole Foreged 5/8" 3/4" Galvanized Eye Nut Description Thimble Eye Nuts are for attaching to 5/8" thru-bolts or threaded end ...
2025-02-26 13:13:38
|