71 - 80 of 125
wireline knuckle joint
Selling leads
|
...Wireline Pulling Tool A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually ...
2025-04-07 11:25:41
|
|
...Wireline Pulling Tool I.Overview The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and ...
2025-04-07 11:25:41
|
|
...Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2025-04-07 11:25:44
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
...h the blowout preventer, and the lower part is connected with the wellhead. The wellhead joint is sealed by threads. When in use, wrap the PTFE ...
2024-12-09 13:34:00
|
|
...Wireline Pulling Tool I. Overview: This special fishing tool is a special tool for fishing the plunger. II. Technical parameters: Specification: 2 ...
2024-12-09 13:39:47
|
|
... composed of an upper joint, a cylinder, a guide joint, an auxiliary spring and a salvage claw. The specific structure is shown in the attached ...
2024-12-09 13:39:47
|
|
...Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward ...
2024-12-09 13:42:17
|