The Special Salvage Tool Wireline Pulling Tool
I. Overview:
This special salvage tool is a special tool for salvaging plungers.
II. Structural characteristics:
The special salvage tool is mainly composed of an upper joint, a
cylinder, a guide joint, an auxiliary spring and a salvage claw.
The specific structure is shown in the attached drawings.
III. Working principle:
This tool is mainly used for salvaging the plunger rising to the
wellhead. When the plunger rises to the wellhead, if you want to
take out the plunger and prevent the plunger from continuing to
work, get down the salvage tool, shock down, open the salvage
claws, grab the plunger head to salvage the neck, and then the
plunger can be fished out. plug. Since there is no mandrel in the
heart of the salvage tool, there is no need to worry that the
one-way valve of the plunger will be opened during salvage, which
ensures the successful salvage of the plunger. At the same time,
the front section is equipped with a salvage guide joint, which can
make the salvage tool successfully complete the salvage in the φ65
hole. The situation where the plunger salvage neck cannot be found
is avoided.
IV, maintenance:
When not in use for the time being, apply grease to the thread and
place the thread protector.
Welcome to contact us at any time.
