1 - 10 of 320
qls connection wireline pulling tool
Selling leads
|
...Wireline Overshot Wireline Pulling Tool I. Overview: The Wireline Overshot is used to salvage tools or objects that have no conventional salvage ...
2024-12-09 17:45:15
|
|
...Wireline Pulling Tool SR QLS BLQJ Connection Universal Pulling Tools Wireline Pulling Tool I. Introduction An S type pulling tool is an outer ...
2024-12-09 13:22:13
|
|
..., barrel, or spear to the upper connector of the bell guide tool. This allows smaller pulling tools to be used in larger tubing. At the same time, ...
2024-12-10 00:01:07
|
|
... Lower connection thread 2″ 1.81″ 1.375″ 1.38″ 15/16″-10UN 1/2-13UN″ 2.5″ 2.25″ 1.375″ 1.81″ 15/16″-10UN 5/8-11UN″ 3″ 2.......
2024-12-09 13:39:37
|
|
..., and then the tools can be lifted out. The structure is simple and easy to use. II. Common technical parameters: Size Fishing neck Connection To ...
2024-12-09 13:41:25
|
|
... the claw, and which is divided into three types: RB, RS and RJ. II. General Technical Parameters: Size Actual OD Fishing neck Connection Grasping ...
2024-12-09 13:22:51
|
|
...used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear ...
2024-12-09 13:42:17
|
|
... into JDC, JDS and JDL according to different grip distances. II.General Technical Parameters Size Actual OD FN Bottom Connection 1.25＂ 1.291＂ 1...
2024-12-09 17:05:03
|
|
QLS SR Tubing Perforator Punch Wireline Pulling Tool Tubing Perforator Punch Wireline Pulling Tool Ⅰ. Introduction Tubing Perforator Punch is a ...
2024-12-09 13:22:13
|
|
...used to retrieve wireline tools or parts of wireline tools that are lost in the tubing. II. General Technical Parameters Size Fishing neck ...
2024-12-09 13:22:13
|