201 - 210 of 243
tubing puncher wireline pulling tool
Selling leads
|
... into the tubing. It is mainly composed of the upper joint, the sleeve, the elastic claw, the center rod, the shear pin seat, the elastic ...
2026-06-28 00:06:28
|
|
...Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint mounted in it. ...
2024-12-09 22:47:42
|
|
Wireline Roller Centralizer Wireline Tool String Ⅰ.Introduction A wireline roller centralizer is used when running in heavily deviated wells, The ...
2025-04-07 11:25:42
|
|
...Wireline Tubing Broach For Remove Rust Wireline Tubing Broach Gauge Cutter Wireline I. Overview: The conical scraper is a tool used to hang any ...
2024-12-09 17:08:26
|
|
... forces created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices ...
2024-12-09 13:36:45
|
|
... in the well or to reshape the tubing with a small amount of deformation. The whole cone can hang up the obstruction of about 4mm. The Tubing ...
2024-12-09 17:08:26
|
|
Wireline Hay Pulley Wireline Pressure Control The Wireline Hay Pulley is used to control and manipulate the direction of the wireline or braided cable ...
2025-04-07 11:25:39
|
|
...wireline or braided cable from a horizontalpositon to a vertical position en route to the stuffing box from the wireline unit. This tool is ...
2024-12-09 13:22:13
|
|
Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated ...
2025-04-07 11:25:43
|
|
... position en route to the stuffing box from the wireline unit. This tool is generally positioned at the wellhead on the lubricator to reduce side ...
2025-04-07 11:25:39
|