171 - 180 of 243
tubing puncher wireline pulling tool
Selling leads
|
...Tubing Broach Gauge Cutter Wireline Tools Diamond Tubing Broach Gauge Cutter Wireline Ⅰ. Introduction The Diamond Tubing Broach Gauge Cutter ...
2024-12-09 13:22:13
|
|
...unt of deformation. The whole cone can hang up the obstruction of about 4mm. The Wireline Tubing Broaches are used to remove or broach tight spots ...
2024-12-09 13:22:13
|
|
... up and down. The effect of jarring depends to a large extent on the weight of the jar upper link and the jar stroke, as well as tubing size and ...
2024-12-09 13:22:13
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... into small drift diameter from large drift diameter in the entering process, which usually is connected with the lowest end of tool string. Ⅱ...
2024-12-09 13:22:13
|
|
..., sleeve and brass wedge (pear drop) The pear drop is grooved to accommodate the wire and comes complete with a securing grub screw The more pull ...
2024-12-09 17:06:32
|
|
...depth of tubing correctly. Ⅱ.General Technical Parameters of body Applicable Tubing Fishing neck Connection 1.5＂ 2-3/8",2-7/8＂ 1.375＂ SR15/16-10UN...
2025-04-07 11:25:39
|
|
Tubing End Locator Wireline Tool String Ⅰ.Introduction The tubing end locator, as the name suggests, is a tool used to accurately measure the depth of ...
2024-12-09 13:35:27
|
|
...end of the tubing so that the depth of the tubing can be accurately measured. Ⅱ.General Technical Parameters Size Applicable Tubing Fishing neck ...
2024-12-09 13:35:45
|
|
...Wireline Slickline Fishing Tools 1.25inch～6inch Slickline Tools I.Overview: The Lead Impression Block is used to print the size and shape of ...
2024-12-09 22:39:11
|