251 - 260 of 268
slickline gs pulling tool
Selling leads
|
WirelineTubing Broaches Gauge Cutter Wireline Ⅰ. introduction The Tubing Broaches is a tool used to hang any natural obstruction cone in the well or ...
2024-12-09 13:22:13
|
|
...Tool String I.Introduction A wireline hydraulic jar is a wireline service tool designed for dependable upward jarring during wireline operations. ...
2025-04-07 11:25:43
|
|
...Tool String I.Introduction A wireline swivel joint is used to minimize the line twist when running in and pulling out of the well. It is usually ...
2025-04-07 11:25:47
|
|
... Jar Wireline Tool String I.Introduction A wireline hydraulic jar is a wireline service tool designed for dependable upward jarring during wireline ...
2025-04-07 11:25:44
|
|
.... Firstly it is the weight required to overcome forces created by well pressure and the size of cable used and secondly it is the mass required to ...
2024-12-09 13:22:13
|
|
...Tool String for Oil Well Wireline Stem -Standard Wireline Tool String Ⅰ. Introduction (B) A wireline stem weight bar is designed to serve two ...
2024-12-09 13:31:30
|
|
... created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices in the ...
2024-12-09 17:09:11
|
|
...Tool Trap Wireline 5-3/4-4ACME.O Type 70MPA Wireline Pressure Control Equipment Product overview Hydraulic Tool Trap also known as trap. It is a ...
2025-08-21 08:50:05
|
|
...ht be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by pulling the ...
2024-12-09 22:39:11
|
|
... O.D. should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface ...
2024-12-09 13:31:30
|