231 - 240 of 261
quick joint wireline tool string
Selling leads
|
...used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear ...
2024-12-09 13:51:51
|
|
...Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2024-12-09 17:08:26
|
|
... into the X/XN-type seating joints in the well. II.Technical parameters of common specifications: Nominal Size Actual OD Fishing Neck Top ...
2024-12-09 13:40:21
|
|
... sliding sleeves. The selection key can be used as a non-self-release type but released by a shear pin. B-type self-release tools cannot pass ...
2024-12-09 17:05:03
|
|
Wireline Running F Collar Stop Tools 2-7/8Inch～4-1/2Inch Slickline Tools Introduction The F collar stop tools is mainly composed of an upper joint, ...
2025-10-29 00:15:29
|
|
Wireline Lock Mandrel RZG plug I. Overview: The RZG plug can choose to be placed in the downhole joint, and has the characteristics of two-way balance...
2024-12-09 17:06:32
|
|
...o the tool to keep balance valve in open position, fixed in the welded joint is located and go into the tool, stabilizer bar will be pushed to the ...
2025-05-20 07:31:34
|
|
XX plug Cylinder Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device that is ...
2024-12-09 13:49:50
|
|
... inch XX plug Cylinder Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device that ...
2024-12-09 22:39:11
|
|
... pressure. When multiple wireline runs are required, the lubricator has to be tested each time the bottom connection is broken, and much time can ...
2024-12-09 13:22:13
|