181 - 190 of 261
quick joint wireline tool string
Selling leads
|
...Quick Test Sub Wireline Pressure Control Equipment 5K Wireline Quick Test Sub Wireline Pressure Control Equipment Ⅰ. Introduction During Wireline ...
2024-12-09 13:22:13
|
|
..., barrel, or spear to the upper connector of the bell guide tool. This allows smaller pulling tools to be used in larger tubing. At the same time, ...
2024-12-10 00:01:07
|
|
... peel type dead plug at the end of the tubing. II.Structural features The Tubing Swage is such a structure, the upper part of the external thread ...
2024-12-09 22:39:11
|
|
...remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to ...
2024-12-09 13:22:13
|
|
...Wireline Fishing Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod ...
2024-12-09 13:48:14
|
|
Anti Corrosion Wireline Fishing Tool Wireline Blind Box Wireline Fishing Tool Wireline Blind Box I.Overview The Blind Box is used to beat down an ...
2024-12-09 13:22:13
|
|
2 inch Wireline Blind Box Wireline Fishing Tool Wireline Fishing Tool Wireline Blind Box The Blind Box is used to beat down an obstruction encountered ...
2024-12-09 13:42:53
|
|
Wireline Lightweight Lubricator 3Inch 10,000PSI Wireline Pressure Control Equipment overview The lightweight lubricator is pipe with standing high ...
2025-12-27 00:34:27
|
|
...tools Wireline Pulling Tool GS hydraulic labor tools Wireline Pulling Tool is used to pull inner fishing necks, which can cut off and release an ...
2025-04-07 11:25:45
|
|
...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed ...
2024-12-09 13:22:51
|