61 - 70 of 253
nickel alloy wireline pulling tool
Selling leads
|
..., a cylinder, a guide joint, an auxiliary spring and a salvage claw. The specific structure is shown in the attached drawings. III. Working ...
2024-12-09 13:39:47
|
|
... operation. Run the Gauge cutter before running the downhole tool to determine whether the downhole device can pass through the tubing and to ...
2024-12-09 22:47:42
|
|
Heavy Duty Salvage Release Tool Wireline Pulling Tool I.Introduction Heavy Duty Salvage Release Tool It is a throwing tool used to salvage tools or ...
2024-12-09 13:22:13
|
|
...Wireline SS Pulling Tool (SSJ type) is a lightweight, pressure-resistant device which is designed for Wireline and Slickline operations. This ...
2025-04-07 11:25:48
|
|
...tool Wireline Pulling Tool I. Overview: This special fishing tool is a special tool for fishing the plunger. II. Technical parameters: Specificatio...
2024-12-09 13:39:47
|
|
... case for easy storage and transportation. With a maximum pressure of 20MPa, its length is 200mm and the surface is polished to ensure a smooth ...
2025-04-07 11:25:48
|
|
Nickel Alloy Wireline Accelerator Slickline Equipment API Q1 Approved Wireline Accelerator Wireline Tool String Introduction A wireline accelerator is ...
2024-12-09 13:22:13
|
|
Nickel Alloy Wireline Scratcher Slickline Tools 2.5 Inch Gauge Cutter Wireline Wireline Scratcher Gauge Cutter Wireline I.Introduction A wireline ...
2024-12-09 13:22:13
|
|
...Wireline Tool String I. Introduction The fluted centralizer is used to centralize wireline tool strings inside the tubing, during operations in ...
2024-12-09 17:05:03
|
|
Tubing Perforator Wireline Pulling Tool Ⅰ. Introduction A type Tubing Perforator (tubing punch) is a mechanical device designed to perforate standard ...
2024-12-09 13:22:13
|