121 - 128 of 128
knuckle joint slickline tool string
Selling leads
|
B Shifting Tool Wireline Running Tool I.Introduction: B Shifting Tool used to place the A and X-type closed sliding sleeves in the open or closed ...
2024-12-09 17:05:03
|
|
... before running the downhole tool determines whether the downhole device can pass through the tubing and where in the tubing sits the joint. At the ...
2024-12-09 13:22:13
|
|
XX plug Cylinder Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device that is ...
2024-12-09 13:49:50
|
|
...875 inch XX plug Cylinder Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device ...
2024-12-09 22:39:11
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
WirelineTubing Broaches Gauge Cutter Wireline Ⅰ. introduction The Tubing Broaches is a tool used to hang any natural obstruction cone in the well or ...
2024-12-09 13:22:13
|
|
...tool is a tool for putting in downhole instruments, with the upper end connected with the basic tool string and the lower end connected with the ...
2024-12-09 13:30:01
|