111 - 120 of 128
knuckle joint slickline tool string
Selling leads
|
Flat Bottomed Type GO Devil Wireline Fishing Tool I. Overview: The Flat Bottomed Type GO Devil is used to cut the stuck tool string wire. The Flat ...
2024-12-09 13:49:41
|
|
... operation. Run the Gauge cutter before running the downhole tool to determine whether the downhole device can pass through the tubing and to ...
2024-12-09 22:47:42
|
|
...Joint Coiled Tubing Tools For Downhole String I. Overview: The pump opening joint is a tool connected to the end of the downhole string or fluid ...
2024-12-09 18:33:53
|
|
F Type Lock Cylinder Mandrel Slickline Wireline Nickel Alloy F Lock Mandrel Wireline Running Tool I.Overview: F-type lock cylinder is a kind of ...
2024-12-09 13:22:23
|
|
Bell Guide Set Wireline Pulling Tool I. Product Brief The bell guide tool is composed of an upper joint and a guide tube. Connect the upper end of the ...
2024-12-09 13:43:12
|
|
GS Pulling Tool Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an ...
2024-12-09 13:42:17
|
|
GS Type Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 13:51:51
|
|
3 inch GS Type Pulling Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 17:08:26
|
|
... part of the pump opening joint is pressurized from the ground to the flushing pressure, the overflow channel can be opened, so that the pump ...
2024-12-09 13:27:49
|
|
...profile nipple. It can be used to act as a lower stop for downhole devices and can be used as an upper stop to secure tools so that they do not ...
2024-12-09 22:39:11
|