101 - 110 of 120
equalizing mandrel running tool
Selling leads
|
Wireline Scratcher 1.875inch Gauge Cutter Slickline Tools 1. Overview The Wireline Scratcher is used to brush off dirt, paraffin and filling cuttings ...
2024-12-09 22:39:11
|
|
... the tool string inside large bore tubing. Normally used in the tool string when running pressure and temperature gauges, it helps centralize and ...
2024-12-09 13:22:13
|
|
... centralizer can overcome friction which can be caused by the tool string scraping against the tubing wall. Ⅱ. General Technical Parameters Size O...
2024-12-09 13:45:21
|
|
... roller centralizer can overcome friction which can be caused by the tool string scraping against the tubing wall. Ⅱ. General Technical Parameters ...
2024-12-09 22:39:11
|
|
... shock absorber is used to reduce the vibration transmitted to the instrument when running in. The shock absorber is basically composed of a ...
2024-12-09 13:42:17
|
|
... shock absorber is used to reduce the vibration transmitted to the instrument when running in. The shock absorber is basically composed of a ...
2024-12-09 13:42:17
|
|
... operation. Run the Gauge cutter before running the downhole tool to determine whether the downhole device can pass through the tubing and to ...
2024-12-09 22:47:42
|
|
...relies on the special dropping tool to drop into the predetermined position, and does not rely on the shock of the jar to complete the throwing. ...
2024-12-09 13:22:23
|
|
... before running the downhole tool determines whether the downhole device can pass through the tubing and where in the tubing sits the joint. At the ...
2024-12-09 13:22:13
|
|
... O.D. should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface ...
2024-12-09 13:31:30
|