91 - 100 of 120
equalizing mandrel running tool
Selling leads
|
Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated ...
2024-12-09 17:07:01
|
|
1.875 inch Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in ...
2024-12-09 17:08:42
|
|
...Tools HDQRJ Connection I. Introduction A wireline gauge cutter is a wireline tool designed to gauge and scrape clean the wall of the tubing. The ...
2024-12-09 13:22:13
|
|
... O.D. should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface ...
2024-12-09 13:22:13
|
|
... the i.d. Of the tubing. The Cutter o.d. should be selected very close to the i.d. of the tubing in which it is run. It should be used prior to ...
2024-12-09 13:22:13
|
|
... can be attached to the downhole instrument alone and released in the downhole, or it can be attached to the upper part of the tool string. After ...
2024-12-09 22:39:11
|
|
... separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: Size Fishing neck Connection 2-3/8＂ 1...
2024-12-09 13:27:31
|
|
... separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: SIZE FISHING CONNECTION 2-3/8＂ 1.375＂ ...
2024-12-09 13:30:01
|
|
...connected to the tool string and run down the well. The lower end of the sand bailer is inclined, which is conducive to the well. Its working ...
2024-12-09 23:37:06
|
|
2 Inch Wireline Brush Gauge Cutter Slickline Tools I.Introduction The Wireline Brush is used to brush out scale, waxes or packing debris from the ...
2024-12-09 13:22:13
|