41 - 50 of 54
5 5m rod drawing machine
Selling leads
|
Wiremac Continuous Copper RBD Drawing Machine With Quick Die Change Main features of the equipment: 1. The gear box of the main engine is an integral ...
2026-04-20 00:25:29
|
|
Technical Parameters Item DL-400/9C Input wire 8.0 mm Output wire 2.25 - 3.0 mm Max die passes 9 Max line speed 600 m/min Main motor power 132 kw (AC) ...
2024-12-09 20:41:25
|
|
1.0 To 2.76 Mm Intermediate RBD Wire Annealing Machine Main Features Annealing mechanism The annealing machine adopts the principle of DC short...
2024-12-09 20:41:25
|
|
Horizontal DC Annealing Equipment For Copper Wire RBD Machine Introduction Annealing device (1) Type: horizontal DC annealing (2) Diameter of ...
2024-12-09 20:41:25
|
|
..., the tension axis of the wire rod shall be symmetrical with the center line of the die hole through debugging, so as to make the stress of the ...
2024-12-09 20:41:25
|
|
... the friction between die hole diameter and wire rod. The worse the smoothness of the die hole, the greater the friction resistance between the ...
2024-12-09 20:41:25
|
|
... the die hole under the action of a certain tension to make the plastic deformation of the wire rod, reduce the section and increase the length. It ...
2024-12-09 20:41:25
|
|
...type Series) and straight line (i.e. conical Series). From the point of view of uniform deformation of wire rod in the stay die, it seems that the ...
2024-12-09 20:41:25
|
|
Right Direction Fine Wire Drawing Equipment With Low Power Introduction Wire drawing oil stay wire: plastic deformation occurs when the wire blank ...
2024-12-09 20:41:25
|
|
... increases, the tensile resistance also increases accordingly, that is, the tensile force consumption is large in the drawing process. Relationship ...
2024-12-09 20:41:25
|