1 - 10 of 135
connectors misalignment test apparatus
Selling leads
|
... 18. Equipment Overview During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external ...
2025-07-25 00:17:41
|
|
...Misalignment Test Apparatus Complied Standards & Clauses For Charging Interface Misalignment Test Apparatus This misalignment test apparatus ...
2025-07-25 00:17:41
|
|
... 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure It is used to process the mechanical load flexing test of the ...
2025-07-25 00:17:41
|
|
... equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...
2025-07-25 00:17:41
|
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors ...
2025-07-25 00:17:41
|
|
... fig13, fig14. IEC 62196-1:2014 clause 17.2. Equipment Overview for Switch Socket Interlock Withdraw Force Test Apparatus Test purpose: The ...
2025-07-25 00:17:41
|
|
...Test Apparatus Complied Standards & Clauses IEC 62196-1: 2020 Ed.4CDV clause 8.7, figure 8. Equipment Overview This label marking abrasion test ...
2025-07-25 00:17:41
|
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy ...
2025-07-25 00:17:41
|
|
... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical ...
2025-07-25 00:17:41
|
|
IEC 62196 Dual station Label Marking Abrasion Test Apparatus Complied Standards & Clauses This label marking abrasion test apparatus conforms to IEC ...
2025-07-25 00:17:41
|