1 - 10 of 15
vsm25b 24s 15 degree stepper motor
Selling leads
|
... type of shafts: run-through shaft, captive shaft and external drive. The step angle is 15°/step, and we also have 7.5°gear ratio for choice. The ...
2024-12-09 17:14:42
|
|
0.6096 mm pitch Trapezoidal lead screw run through shaft permanent magnet motor This is our 36mm linear lead screw motor, with run-through shaft ...
2025-07-23 00:16:38
|
|
...Stepper motor lead screw 25mm PM linear stepping motor with screw linear micro motor SM25-Linear stepping motor with lead screw, when the rotor is ...
2024-12-09 17:14:42
|
|
... the same time ,the lead will rotating. motor stepper step angle is 7.5 degree (also this can be 15 degree) lead pitch is 0.6096mm (there oprional ...
2024-12-09 17:14:42
|
|
... are many choices according to the thickness of the motor, step angle, assembly method, etc., and can also be customized according to customer ...
2024-12-09 17:14:42
|
|
..., gearbox stepper motor boasts a pull in torque of 3.5 Gf-cm Min. (at 500 Pps , 5.0v Dc), an efficiency of 10~20%, and a step angle of 18 degrees. ...
2025-07-23 00:16:38
|
|
... ,the step angle of this single motor is 7.5 degrees, and it takes 48 steps to make one revolution (without gearbox) In addition, we have different ...
2025-07-23 00:16:38
|
|
... the deceleration effect of the gear box, the final angular resolution of the motor can reach 0.018~0.9 degrees, which can be used for various ...
2024-12-09 17:14:42
|
|
...stepper motor SM35-048-372 is a micro stepping motor with an outer diameter of 35mm. This model is only a typical product. There are many choices ...
2025-07-23 00:16:38
|
|
.... With the deceleration effect of the gearbox, the final angular resolution of the motor can reach 0.018~0.9 degrees, which can be used in various ...
2024-12-09 17:14:42
|