101 - 110 of 122
stepper motor with gear box
Selling leads
|
... of 1.5mm. The length of the output shaft can be appropriately changed according to customer installation requirements, and can also be equipped ...
2025-07-18 00:19:10
|
|
... changed according to requirements, and it can also be equipped with corresponding output devices such as gears, pulleys, worms, screw rods, etc. ...
2025-07-18 00:19:09
|
|
... to others (About 70N, 7KG of thrust) This motor is very commonly used in TRV(thermostatic radiator valve ) and valve control. The slower speed and ...
2025-07-18 00:19:09
|
|
... force is bigger compared to others (About 70N, 7KG of thrust) This motor is very commonly used in TRV(thermostatic radiator valve ) and valve ...
2025-07-18 00:19:09
|
|
...stepper motor Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor ...
2025-07-18 00:19:10
|
|
High speed 2:1 to 1000:1 gear ratio N20 DC brushed motor with GB12 gear ratio Description: This is a N20 DC motor with gearbox. N20 is typical brushed ...
2025-07-18 00:19:09
|
|
... of 10mm and is matched with a worm gear box. The gear box has a right-angle output of 90°, which is suitable for the installation requirements of ...
2024-12-09 17:14:42
|
|
... stepping motor, the gear reduction ratio is 1:32 and 1:64, the voltage of the motor is 5V~12V, the motor can be 1-2 phase or 2-2 phase excitation ...
2025-07-18 00:19:09
|
|
... comes with a cylinder gearbox. Gearboxes are available in different gear ratios from 10:1 to 350:1 The larger the transmission ratio, the slower ...
2025-07-18 00:19:09
|
|
...gear ratio 1.8° step angle NEMA 17 hybrid motor with planetary gearbox Description: This is a NEMA 17 hybrid stepper motor attached with a ...
2024-12-09 17:14:42
|