31 - 40 of 315
small stepper motor oem
Selling leads
|
Small 10mm diameter 5V PM stepper motor with M3 lead screw and nut Description: This is a 10mm diameter stepper motor with M3 lead screw on top. M3 ...
2024-12-09 17:14:42
|
|
8V Small Slider Stepper Motor 15mm Trapezoidal Screw With Hexagonal Nut Explanation: This is a stepper motor with a diameter of 15mm, equipped with a ...
2025-07-19 00:22:13
|
|
... and the lead screw supported by the lead screw rotate to generate thrust. The basic step angle of the motor is 18 degrees, and the motor runs 20 ...
2025-07-19 00:22:13
|
|
Small sized SM08-GB10 8 mm diameter permanent magnet stepper motor with 10*8 mm gearbox Description: This SM08-GB10 motor is a 8mm motor attached with ...
2024-12-09 17:14:42
|
|
... diameter, the shaft length can be according to the demand change appropriately, can also be equipped with gear, pulley, worm, screw, etc. The ...
2025-07-19 00:22:13
|
|
...Stepper Motor 14mm Diameter Micro 2 Phase Stepping Motor Description: This is a 14mm diameter hybrid stepper motor, the motor height is 30mm, The ...
2025-07-19 00:22:13
|
|
...Motor 35mm Small 8v12v 24v Permanent Magnet Stepper Motor 7.5 Degree Coffee Machines Step Motor SM35-048 35mm PM stepper motor SM35-048-372 is a ...
2025-07-19 00:22:13
|
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2025-07-19 00:22:13
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-07-19 00:22:13
|
|
...stepper motor attached with 1812 worm gearbox This series of geared motors is assembled using SM15 stepper motor and 1812 precision metal worm gear ...
2025-07-19 00:22:13
|