181 - 190 of 300
slider stepper motor 8mm
Selling leads
|
... thrust, which can be directly used as an actuator to achieve the action required by customers. The basic angle of the stepping motor is 18 degrees...
2025-07-18 00:19:10
|
|
... ratio combinations for you to choose. The output shaft is a round shaft with a slot. Motor’s output torque is related to motor’s length and gear ...
2025-07-18 00:19:09
|
|
...Stepper Motor NEMA34 1.8 Degree Step Angle With Lead Screw Description: This is a 86mm hybrid stepper motor with trapezoidal screw. Step angle is 1...
2025-07-18 00:19:09
|
|
... and the range is generally between 20~51mm. It can be re-evaluated after special request. Hybrid stepping motor has the advantages of high control ...
2025-07-18 00:19:09
|
|
...stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes 200 steps to rotate one turn. The ...
2025-07-18 00:19:09
|
|
...stepper motor Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor ...
2025-07-18 00:19:10
|
|
...stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it ...
2025-07-18 00:19:09
|
|
...Stepper Motor with Planetary Gearbox Description: This is a NEMA 17 hybrid stepper motor with planetary gearbox. It is available in different gear ...
2025-07-18 00:19:09
|
|
...stepper motor with gearbox Description: This is 25mm permanent magnet PM stepper motor with a gearbox, Step angle is 7.5 degrees (without gearbox), ...
2025-07-18 00:19:09
|
|
...stepper motor with planetary gearbox This is a series of products assembled with a 35mm (NEMA14) square hybrid stepper motor and a cylinder type ...
2025-07-18 00:19:09
|