51 - 60 of 114
pull in torque stepper motor
Selling leads
|
... other gear ratios for to you choose, and it depends on your project requirement. Step angle of single motor is 7.5 degrees, and it takes 48 steps ...
2026-04-16 00:33:42
|
|
...0.2, and the motor is 9 teeth. We can remove the move if customers do not need it. The torque of 6mm motor is about 1 g*cm range, if customers need ...
2026-04-16 00:33:42
|
|
...torque 0.9° step angle 42mm NEMA 17 hybrid stepper motor with brass gear Description: This product is hybrid stepper motor. (NEMA17 motor) Step ...
2026-04-16 00:33:42
|
|
...stepper motor Description: For this 20BY45 motor, 20 means motor’s diameter is 20mm, and 45 means it take 4*5=20 steps to rotate one turn. This ...
2026-04-16 00:33:42
|
|
...stepper motor with protective case Description: This is our 15mm motor attached with a gearbox. This gearbox size is 12mm*10mm. (Length*Width) We ...
2024-12-09 17:14:42
|
|
Product Description: Hybrid Stepper Motor is a type of motor designed for robotics application. It features a 28 mm frame size, 1.8° step angle, a ...
2024-12-09 19:10:59
|
|
.../travel distance is about 39 mm. 0.02mm per step Resistance 10 Ohms Recommended driving voltage 3.3V-5V DC The pull-out thrust of this motor is ...
2024-12-09 18:01:19
|
|
... of a 10*24mm reducer. It is suitable for laser instruments, medical equipment, fiber fusion splicers, etc. match deceleration If the speed ...
2026-04-16 00:33:42
|
|
... levels, and gear ratio on each level is exactly 4:1. With more gear levels, and gear ratio gets bigger, and motor’s output speed is slower. Motor...
2024-12-09 17:14:42
|
|
... that provides a wide range of gear reduction ratios from 1:10 to 1:1000. It is designed to operate in a wide temperature range from -0 to +55 ℃, ...
2026-04-16 00:33:42
|