21 - 30 of 130
low noise linear stepper motor
Selling leads
|
... micro step motor, the output shaft with a pitch of 0.5mm of the screw, through the screw and the screw rod supporting the turn of the screw into a ...
2025-07-18 00:19:09
|
|
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0...
2024-12-09 17:14:42
|
|
...stepper motor copper slider with bracket linear stepper motor: This is a precision miniature stepper motor equipped with a bracket, lead screw and ...
2025-07-18 00:19:09
|
|
... resolution can reach 0.02mm, achieving the purpose of precise control. In terms of actuators, the subdivision drive method is used to meet the ...
2025-07-18 00:19:09
|
|
...0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust. The basic step angle of the motor is 18 degrees, and ...
2025-07-18 00:19:09
|
|
... support to the slider, and make sure slider can move fluently when the load goes up. Lead screw is regular M3 screw, pitch is 0.5mm, and the motor ...
2025-07-18 00:19:09
|
|
VSM1519-M3 15mm lead screw adjustable lead screw length PM linear stepper motor Description: This is a 15mm permanent magnet stepper motor with an M3 ...
2025-07-18 00:19:10
|
|
...Stepper Motor is a kind of stepper motor with slider. It adopts bipolar drive mode and has a wide operating temperature range from -10°C to +60°C. ...
2024-12-09 19:30:15
|
|
...linear stepper with 4 lead wires: This type of motor is a kind of claw-pole permanent magnet stepping motor, so it firstly has the common parameter ...
2025-07-18 00:19:09
|
|
Small size M1.7 lead screw permanent magnet 8mm 18° step angle linear stepper motor Description: This is our VSM08284 8mm permanent magnet motor with ...
2024-12-09 17:14:42
|