91 - 100 of 217
high torque pm stepper motor
Selling leads
|
.... Its pull-in torque is 1.5 Gf.cm at 500 Pps, and its holding torque is 1.5gf.cm~2.0gf.cm. It can be widely used in various industrial applications...
2024-12-09 19:30:15
|
|
diameter 25mm pm Geared Stepper Motor 5V Micro stepping gear motor Description: The SM25-048S-30G is a 2-phase 4-wire permanent magnet motor with a ...
2025-07-22 00:24:27
|
|
...torque NEMA 17 hybrid stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes 200 steps ...
2025-07-22 00:24:27
|
|
Micro 8mm diameter VSM0801 18 degrees round shaft PM stepper motor Description: This VSM0801 motor is 8mm diameter motor with round shaft. Motor’s ...
2025-07-22 00:24:27
|
|
... ,the step angle of this single motor is 7.5 degrees, and it takes 48 steps to make one revolution (without gearbox) In addition, we have different ...
2025-07-22 00:24:27
|
|
...Stepper Motor With Worm Gearbox Description: This is 15mm diameter double stacked motor with worm gearbox. This motor is a double stacked motor. It ...
2025-07-22 00:24:27
|
|
.... It has excellent dielectric strength of 1mA Max. @ 500V, 1KHz, 1Sec., inductance of 1.5/2.3 mH, insulation resistance of 100MΩ Min. @500Vdc, ...
2024-12-09 19:10:59
|
|
...rotate one turn. We have 28mm and 40mm length. 40mm has bigger torque, and 28mm has smaller size. Customers can choose the length based on their ...
2025-07-22 00:24:27
|
|
...stepper motor with planetary reducer Description: This is NEMA 17 hybrid stepper motor with a planetary gearbox. There are different gear ratios ...
2025-07-22 00:24:27
|
|
5Vdc Micro Slider Linear Stepper Motor Micro Stepper Motor 10mm Linear Screw Stepping Motor Manufacturer Supply 10mm Micro stepper Motor 5VDC 10BY25 ...
2025-07-22 00:24:27
|