91 - 100 of 214
high torque gearbox stepper motor
Selling leads
|
.... Its pull-in torque is 1.5 Gf.cm at 500 Pps, and its holding torque is 1.5gf.cm~2.0gf.cm. It can be widely used in various industrial applications...
2024-12-09 19:30:15
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-07-27 00:16:39
|
|
...torque NEMA 17 hybrid stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes 200 steps ...
2025-07-27 00:16:39
|
|
.... This 20mm permanent magnet stepper motor has an 18 degree step angle. It has high reliability and low price, and its torque is higher compared to ...
2025-07-27 00:16:39
|
|
...gearbox for customers to choose. The coil resistance/cable length/cable color of this motor can also be customized. Regarding the worm gear, the ...
2024-12-09 17:14:42
|
|
...stepper motor Description: For this 20BY45 motor, 20 means motor’s diameter is 20mm, and 45 means it take 4*5=20 steps to rotate one turn. This ...
2025-07-27 00:16:39
|
|
.... It has excellent dielectric strength of 1mA Max. @ 500V, 1KHz, 1Sec., inductance of 1.5/2.3 mH, insulation resistance of 100MΩ Min. @500Vdc, ...
2024-12-09 19:10:59
|
|
...rotate one turn. We have 28mm and 40mm length. 40mm has bigger torque, and 28mm has smaller size. Customers can choose the length based on their ...
2025-07-27 00:16:39
|
|
...Stepper Motor 5V Micro stepping gear motor Description: The SM25-048S-30G is a 2-phase 4-wire permanent magnet motor with a gearbox on top. The ...
2025-07-27 00:16:39
|
|
...stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it ...
2025-07-27 00:16:39
|