111 - 120 of 122
geared stepper motor 3 3vdc
Selling leads
|
... of 1.5mm. The length of the output shaft can be appropriately changed according to customer installation requirements, and can also be equipped ...
2026-04-16 00:33:42
|
|
... changed according to requirements, and it can also be equipped with corresponding output devices such as gears, pulleys, worms, screw rods, etc. ...
2026-04-16 00:33:42
|
|
... to others (About 70N, 7KG of thrust) This motor is very commonly used in TRV(thermostatic radiator valve ) and valve control. The slower speed and ...
2026-04-16 00:33:42
|
|
... force is bigger compared to others (About 70N, 7KG of thrust) This motor is very commonly used in TRV(thermostatic radiator valve ) and valve ...
2026-04-16 00:33:42
|
|
... of 10mm and is matched with a worm gear box. The gear box has a right-angle output of 90°, which is suitable for the installation requirements of ...
2024-12-09 17:14:42
|
|
... stepping motor, the gear reduction ratio is 1:32 and 1:64, the voltage of the motor is 5V~12V, the motor can be 1-2 phase or 2-2 phase excitation ...
2026-04-16 00:33:42
|
|
...gear ratio 1.8° step angle NEMA 17 hybrid motor with planetary gearbox Description: This is a NEMA 17 hybrid stepper motor attached with a ...
2024-12-09 17:14:42
|
|
...stepper motors with a diameter of 10mm. There are also different gear ratios to choose from. The gear ratio is determined by the gear. It has a 4:1 ...
2024-12-09 17:14:42
|
|
... stepper motors. We have different gear ratio for to choose. Gear ratio is determined by gear levels. Gear ratio on each level is 4:1. We have 6 ...
2024-12-09 17:14:42
|
|
..., 0.8mm shaft diameter, the shaft length can be according to the demand change appropriately, can also be equipped with gear, pulley, worm, screw, ...
2024-12-09 17:29:43
|