81 - 90 of 172
d shaft geared stepper motor
Selling leads
|
... shaft is 3.9mm length 1mm diameter round shaft, and it can be customized into D shaft. Standard coil resistance is 21Ω/phase, and we can change it ...
2026-04-16 00:33:42
|
|
... changed according to requirements, and it can also be equipped with corresponding output devices such as gears, pulleys, worms, screw rods, etc. ...
2026-04-16 00:33:42
|
|
...15mm stepper motors combined together to provide motor torque. The efficiency of this motor is about 80%, and a double stacked motor has about 1.8 ...
2026-04-16 00:33:42
|
|
... attached with a gearbox. This gearbox size is 12mm*10mm. (Length*Width) We have different gear ratios for choosing, from 2:1 to 1000:1. Customers ...
2024-12-09 17:14:42
|
|
...gear ratios for choosing (from 2:1 to 1000:1), customers can choose gear ratio based on their speed/torque requirement. About connector type, on ...
2026-04-16 00:33:42
|
|
...gear ratio, and gear ratio is 32:1 This motor is a typical unipolar motor with 5 cables, and the red cable is common cable. This motor has cheap ...
2026-04-16 00:33:42
|
|
... lead screw shaft hybrid stepper motor with manual nut Description: This is a 20mm diameter hybrid stepper motor with a run-through lead screw ...
2026-04-16 00:33:42
|
|
...stepper motor with protective case Description: This is our 15mm motor attached with a gearbox. This gearbox size is 12mm*10mm. (Length*Width) We ...
2024-12-09 17:14:42
|
|
Gear Ratio 1.8° Step Angle NEMA 17 Hybrid Motor with Planetary Gearbox Description: This is a NEMA 17 hybrid stepper motor with a planetary gearbox. A ...
2024-12-09 17:14:42
|
|
...stepper motor with gearbox Description: This is SM25-048S Permanent Magnet motor with a gearbox on top. The step angle of single motor is 7.5 ...
2026-04-16 00:33:42
|