101 - 110 of 124
d shaft bipolar stepper motor
Selling leads
|
...0.5mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust. The basic step angle of the motor is 18 degrees, and ...
2026-04-16 00:33:42
|
|
... has the common parameter characteristics of stepping motors. For example: basic size, step angle, number of phases, resistance, maximum no-load ...
2026-04-16 00:33:42
|
|
...M1.7*P0.3 is very uncommonly used lead screw, because this motor was developed for a specific project. Also it might be hard for customers to find ...
2024-12-09 17:14:42
|
|
... projected, and it’s not standard lead screw shaft. We are able to customize it into M2*P0.4 standard lead screw if you want. Not only lead screw ...
2024-12-09 17:14:42
|
|
...gearbox for customers to choose. The coil resistance/cable length/cable color of this motor can also be customized. Regarding the worm gear, the ...
2024-12-09 17:14:42
|
|
... the worm gearbox, we have different gear ratio for you to choose. The bigger gear ratio is, output shaft rotates slower with bigger torque. About ...
2024-12-09 17:14:42
|
|
Product Description: The stepper linear motor is an ideal choice for applications that require precise control of linear motion. Our linear stage ...
2024-12-09 19:26:19
|
|
...the gear ratio of the motor. The gear ratio of this motor is 30:1. This motor is commonly used in medical equipment and electronic locks. Customers ...
2026-04-16 00:33:42
|
|
... ratio for choosing, from 10:1 to 350:1. Customer can choose suitable gear ratio based on their requirement on speed/torque. There is a gear on ...
2024-12-09 17:14:42
|
|
...0.2, and the motor is 9 teeth. We can remove the move if customers do not need it. The torque of 6mm motor is about 1 g*cm range, if customers need ...
2026-04-16 00:33:42
|